Please assign a menu to the primary menu location under menu

Sales Planning

How to Pick the Right Tile Sealer?

A tile sealer might or might not be a good decision when it goes to completing your tile. It’s always a smart option to protect the tile grout, but whether or not you should depend on the materials the tile is constructed of. Certain tile sealers will harm some tiles, causing them to become brittle, black, or faded.

What Kind of Tile Do You Have?

You should know what sort of tile you have before going to the hardware shop and buying a gallon bucket of tile sealant. All permeable tiles, for even the most part, must be sealed. This means that tile sealant will substantially benefit natural stone tiles and acrylic ceramic tiles. If you’re not sure if the tile is porous, rub it with a wet sponge. The tile is porous if there is a black patch where the sponge used to be.

Is It Better to Use Petroleum or Water-Based Sealants?

Sealers also should be purchased based on the porousness of the tile. Ceramic tiles should be sealed with a petroleum-based tile sealer, while real stone tiles should only be sealed with a water-based tile sealer.

If You’re Still Unsure, Ask

If you take a sample of your tile, the sales assistant at your hardware shop will assist you in determining the appropriate tile grout sealer, if required.

How Much Will You Require?

Once you’ve determined whether or not you require tile sealer and which type you require, you may calculate how much you’ll require. Estimate the width and length of the area you’ll be sealing then multiply the two figures together. This will provide you with the square footage. The area covered by most gallon pails is indicated on the label. You’ll need 2 pails if a pail fills 25 square feet and you have 50 square feet.

How to Use Tile Sealer?

Ensure to work swiftly but smoothly while applying the tile sealer you purchased to the area. Any faults in the way the sealer is smeared or stroked on will show up when the sealer cures.

  1. Create a barrier around the tile and safeguard the floors, trim, and furnishings. This will prevent the sealer from getting on other surfaces.
  2. Follow all safety procedures and put on any necessary protective gear. This will vary based on the substances you use, but you really should always ensure that your work area is well ventilated, that you wear old protective clothing that you don’t mind being stained, and that you wear a facial or respirator mask, gloves, and eye protection.
  3. Mix the contents of the container, pail, or sealer.
  4. Begin spreading the sealer with a squeegee or brush in one corner of the tile fast. Tiny amounts of sealant can be transferred to a small can and pouted out on the floor in tiny portions while quickly smoothing it out.
  5. Maintain an even amount of sealant throughout the procedure until the area to be sealed is complete. Because some of the sealants will permeate the tile, keep spreading it out until the entire area is equally coated.
  6. Allow it sit for 24 hours before moving or putting anything at all on the tiles. This will assist the sealant in adhering to the surface and forming a protective barrier.
TimothyStyons
the authorTimothyStyons